Graco Sprayers

Graco PUR, Elastomer, Polyurea Spraying Equipment

A full selection of Graco’s two-component equipment for spraying all kinds of polyurethane foam insulation and polyurea coatings. Graco is a pioneer in movable pneumatic and hydraulic piston machines in the 0.35-20 kg/min output range. Graco/Gusmer is the market leader in our country.

Among our Graco products you can also find T2 transfer pumps.

Technical Support

Support for problem-solving, technical support and maintenance of Graco, Gusmer and SAIP equipment.

Spare Parts

Our activities include a spare parts service for machines. Here in Finland we stock wear parts for machines. We can also supply spare parts quickly from our principals, where necessary, even on the next working day.

Graco Equipment

Graco Reactor 2 E-XP2 – Electric motor-operated

Technical specifications
Max. working pressure
240 bar
Min. working pressure
not specified
Max. hose length
94 m
Max. output
7.6 l/min
Max. heater power
15000 W
Weight
159 kg
Max. fluid temperature
88 °C
Power supply 380-400 V, 3-phase
35 A

GRACO InSite as standard in the Elite model!
More information about machine

Graco Reactor E10 hp – Electric motor-operated

Technical specifications
Pressure safety limit
206 bar (20.6 MPa, 3000 psi)
Max. spray pressure
172 bar (17.2 MPa, 2500 psi)
Max. output
3.8 l/min (1 gallon/min)
Max. fluid temperature
77 °C (170°F)
Heating time
77 °C 20 min (from 21 °C)
Preheater
2760 W
Booster heater
1240 W
Tank capacity each
23 litres (6 gallons)
Max. hose length
32 m (105 ft)
Dimensions (W x D x H)
73 x 91 x 117 cm
Weight
108 kg
Recommended mix chamber
AW2222 (round pattern)
Power supply
(2)X15A 230 VAC
Spray gun
Fusion AP AW2222

GRACO InSite vakiona Elite mallissa!
More information about machine

Graco Reactor H-XP2 – Hydraulically operated

Technical specifications
Max. working pressure
240 bar
Min. working pressure
83 bar
Max. hose length
94 m
Max. output
5.7 l/min
Max. heater power
15 kW
Weight
252 kg
Max. fluid temperature
88 °C
Power supply 380-400 V, 3-phase
35 A

More information about machine

Graco Reactor H-XP3 – Hydraulically operated

Technical specifications
Max. working pressure
240 bar
Min. working pressure
59 bar
Max. hose length
125 m
Max. output
10.6 l/min
Max. heater power
20 kW
Weight
272 kg
Max. fluid temperature
88 °C
Power supply 380-400 V, 3-phase
35 A

More information about machine

PU Insulation Sprayers

Graco Reactor 2 E-30 – Electric motor-operated

Technical specifications
Max. working pressure
138 bar
Min. working pressure
not specified
Max. hose length
94 m
Max. output
13.5 l/min
Max. heater power
10,000 W
Weight
161 kg
Max. fluid temperature
88 °C
Power supply 380-400 V, 3-phase
35 A

GRACO InSite as standard in the Elite model!
More information about machine

Graco Reactor A-25

Technical specifications
Max Max. working pressure
138 bar
Min. working pressure
not specified
Max. hose length
64 m
Max. output
11,4 kg/min
Max. heater power
6000 W
Weight
117.6 kg
Max. fluid temperature
88 °C
Power supply 380-400 V, 3-phase
35 A
Compressed air requirement
800 l/min, 6 bar

GRACO InSite as standard in the Elite model!
More information about machine

Graco Reactor E-20

Technical specifications
Max. working pressure
138 bar
Min. working pressure
not specified
Max. hose length
64 m
Max. output
9 kg/min
Max. heater power
6000 W
Max. fluid temperature
88 °C
Weight
150 kg
Power supply 380-400 V, 3-phase
24 A

More information about machine

Graco Reactor H-30

Technical specifications
Max. working pressure
138 bar
Min. working pressure
41 bar
Max. hose length
94m
Max. heater power
10 kW
Max. fluid temperature
88 °C
Weight
240 kg
Output
12,4 kg/ min
Output per cycle
(A and B) 0.24 litres
Power supply requirement
400 V, 3-phase 35 A

More information about machine

Graco Reactor H-40

Technical specifications
Max. working pressure
138 bar
Min. working pressure
41 bar
Max. hose length
125m
Max. heater power
15,300 kW
Max. fluid temperature
88 °C
Weight
271 kg
Output
20 kg/min
Output per cycle
(A and B) 0.24 litres
Power supply requirement
400 V, 3-phase 41 A

More information about machine

Pumps

Graco T1 Transfer Pump

Technical specifications

Graco T1 transfer pumps are used for transferring raw materials from barrels to the machine. They are designed to withstand PUR raw materials and are equipped with first-class seal materials.

Pressure ratio
2:1
Max. working pressure
25 bar
Max. compressed air
12 bar
Max. continuous output
9.5 l/min
Max. recommended speed
100 cycles/min

More information about pump

Graco T2 Transfer Pump

Technical specifications

Graco T2 transfer pumps are used for transferring raw materials from barrels to the machine. They are designed to withstand PUR raw materials and are equipped with first-class seal materials.

Pressure ratio
2.25:1
Max. working pressure
28 bar
Max. compressed air
12 bar
Max. continuous output
20 l/min
Volume per pump cycle
0.24 litres
Max. recommended speed
100 cycles/min

More information about pump

Graco T3 SST & CS Transfer Pump

Graco T3 transfer pumps are used for transferring raw materials from barrels to the machine. They are designed to withstand PUR raw materials and are equipped with first-class seal materials.

Pressure ratio
3:1
Max. working pressure
21.7 bar
Max. compressed air
6.8 bar
Max. continuous output
17 l/min
Max. recommended speed
100 cycles/min

More information about pump

Technical Support

Our technical support provides assistance in the event of problems. If there are any faults in a Graco, Gusmer or Saip device, please contact our technical support by telephone or e-mail:

We are also responsible for the maintenance of equipment.
More information about the use of Graco devices is offered by Graco University.

 

Spare Parts

We supply spare parts for the brands we represent (Graco, Gusmer and Saip). Since machine spare parts (such as wear parts) are stored in Finland, they can be delivered very quickly. At best, our service will deliver the parts the next working day.

 

  • Please contact:

 

  • for orders
  • orders.comp-pu@bangbonsomer.com

 

Materials